Seeing green pool water can be shocking for any pool owner. No matter the cause, whether algae growth or poor water balance, getting rid of algae ASAP is key to keeping your swimming pool clean and safe. A popular choice is pool shock. However, can pool shock alone eliminate green water? So, let’s find out how a robot pool cleaner or other must-have tools, such as a pool vacuum and a skimmer, work with the pool shock to re-establish the pool’s clarity.
What Causes Swimming Pool Water To Turn Green?
One of the most common reasons that water turns green is the growth of algae, which can thrive in pools with a pH that is out of balance, lack of chlorine, or poor filtration. Algae spores can be introduced into the pool by wind, rain, or swimsuits. They multiply rapidly when they reach favorable conditions, clouding and greening the water.
Pool shock is typically the first line of defense against this foe. It is a concentrated dose of chlorine or other sanitizing chemicals that kill algae, bacteria, and other contaminants. But shock alone may not be enough to eliminate the problem, and that’s where a robot pool cleaner and other equipment come into play.
If you plan on getting rid of the green water with pool shock
Step 6: Test and Balance Pool Water
Test the water’s pH, alkalinity, and chlorine levels before adding pool shock. The pH should range between 7.2 and 7.6 for best shock performance and overall sanitation. The shock won’t be effective if its pH is too high or low.
Shock the Pool
Follow the manufacturer’s instructions for how much shock you need based on the size of your pool. You’ll generally need to use calcium hypochlorite or sodium dichloro for shocking. For a very green pool, you may need to add double or triple the shock.
Run the Pool Filter
Run your pool filter 24 hours nonstop after (adding the shock). Create a whirlpool to circulate the shock through the entire pool and begin clearing the water.
Why, After Shocking , You Need a Robot Pool Cleaner
Though pool shock kills algae and bacteria, it does not physically remove dead algae and debris. That’s where a robot pool cleaner will come in.
However, there are a few things you should be aware of before purchasing a robotic pool cleaner, such as the Beatbot AquaSense 2 Ultra and Beatbot AquaSense 2 Pro, which are designed to vacuum and scrub the pool’s floor, walls, and waterline.
A pool vacuum also assists with picking up debris and dead algae that settle at the bottom.
A skimmer removes floating debris and prevents it from returning to the pool circulation system.
Beatbot AquaSense 2 models are especially effective because they are equipped with powerful suction, wall-climbing ability, and smart navigation, which will ensure that every corner of the pool is cleaned.
Post-Shocking: Step-By-Step Cleaning
Pool Vacuum: A Must-Have to Clean Up Debris
After the victim algae have had a chance to go into shock (typically 24 hours) in your swimming pool, use a pool vacuum or robot pool cleaner to siphon off the dead algae and debris collected on the bottom of the pool.
Tip 1: Use a Skimmer to Clean the Surface
“Something like a skimmer will catch any floating debris or algae.” Sanitizing the surface to remove contaminants.
Run the Robot Pool Cleaner
To deep clean the pool floor and walls, deploy a robot pool cleaner like the Beatbot AquaSense 2 Pro. Its intelligent mapping knows how to clean every nook and cranny without missing a spot, and it is more than capable of tackling different types of terrain, including stairs and corners.
Backwash the Filter
If you have a sand filter or a DE (diatomaceous earth) filter, backwash your filter to remove any trapped algae or debris.
Check the Pool Chemistry
Once the pool water is clear, test its chemistry and adjust the chlorine, pH , and alkalinity levels accordingly.
What do I do if pool shock doesn’t do the trick?
Your pool can turn green after shock , and cleaning is one reason why it stays green.
Phosphate accumulation: Since algae thrive on phosphates, you can apply a phosphate remover to help clear the tank.
Clogged filter: A dirty or clogged filter limits circulation and inhibits proper cleaning.
Inadequate water circulation: Check that your pool pump and filter work correctly.
Extensive algae bloom—In these particular cases of light swimming pool infestation, an acid wash can be required. Acid washing removes grease, grime, dirt, and algae and helps prevent further issues within the pool.
Will a Robot Pool Cleaner Remove Algae?
A robot pool cleaner (like the Beatbot AquaSense 2 Ultra or Maytronics pool cleaner) can remove dead algae from the pool bottom and walls. Models that can climb walls and have fine filtration are particularly good at trapping small algae particles.
Conclusion
Pool shock is a powerful tool for killing algae and clearing cloudy water, but it is not an end-all solution. You can ensure a thorough cleaning when you combine pool shock with a robot pool cleaner, pool vacuum, and skimmer. If you’re ready to take on the toughest pool cleaning challenges, look no further than the Beatbot AquaSense 2 Ultra and Beatbot AquaSense 2 Pro. With their cutting-edge filtering capabilities, clever navigation systems, and potent suction power, they can address green pool water problems. A good pool-cleaning robot will save you time in the long run and keep your pool sparkling clean all season long!